Ultracentrifugation Tube, UltraCone, PC, 11 x 32mm, 50 pieces

UltraCone Tube

The patented* UltraCone tubes with adapters provide a conical bottom in swinging bucket and fixed-angle rotors. The conical bottom of the tube is ideal for concentrations of materials in swinging bucket runs. One common application of the UltraCone system is in the isolation of RNA. One method described in the literature is commonly modified for use with the Beckman SW1Ti rotor and the Science Services UltraCone tube PN 5064 with PN 4228 adapter (1).

Your rotors can be used at maximum speed and fluid density up to 20°C with the UltraCone adapters and choice of Polyallomer or Polyclear conical tubes. The adapters can be sterilized by autoclaving, ethylene oxide gas or by solvent immersion. The adapters have excellent solvent resistance and will not crack after repeated centrifugation and sterilizatiort cycles.

How to Use

The internal taper of the adapter matches exactly the external taper of the UltraCone tubes. Use one adapter for each rotor hole. When using UltraCone tubes and adapters in fixed-angle rotors, the appropriate fixed-angle tube cap must be used (2). Insert the adapter into your rotor hole followed by your filled tube. For swinging bucket rotors observe the filling levels normally used for thin wall tubes: 2-3 millimeters from the top. After your run remove the tube from the bucket. The adapter may remain in the bucket alter some runs (long runs at high temperatures) but can be removed with the PN 4209 Removal Tool. This tool can be used with the 7/16 through 5/8“ adapters and is convenient for reaching adapters at the bottom of long, narrow swinging buckets. The PN 4195 Tube Cutter can be used to cut the conical tip from the body of the tube for access to your concentrated material.

(1) Chirgwiri. John M., Pryzbla, Alan E., MacDonald, Raymnond J., and Rutter, William J., ‘Isolation of Biologically Active Ribonucleic Acid from Sources Enriched in Ribonuclease,“ (1979) Biochemistry 18, 5294-5299.

(2) Use caps designed for Beckman thin wall Ultra-Clear and polyallomer tubes and for Kontron ihm wall CAB arid polyallomer tubes.

*U.S. Patent 4,990,129 and UK Patent 2222538 apply.