![Ultracentrifugation Tube, Thick Wall, PA, 11x34mm, 50 pieces](https://www.scienceservices.eu/media/catalog/product/cache/87779d8a35dba684c50908f1c7322ddc/s/e/seton_thickwall_family.png)
Ultracentrifugation Tube, Thick Wall, PA, 11x34mm, 50 pieces
S5007
Product Details
Description
Thick Wall Tubes
Thick wall polyallomer and polycarbonate tubes are designed for use with no caps in fixed-angle and swinging bucket rotors. These tubes can be reused and can be sterilized by autoclaving at 121°C, ethylene oxide gas or cold methods. Cold sterilization is recommended for polycarbonate tubes because the tube life may be reduced by autoclaving. Alcohol should not be used with polycarbonate.
These tubes can be run when partially filled but should be at least half-full. Thick wall polyallomer tubes are translucent and polycarbonate transparent; both are non-wettable. When used in fixed-angle rotors, the maximum fill level is a function of the rotor angle, and the maximum allowable speed will depend on the rotor type and temperature of run.
More Information
Type |
Thick Wall
|
---|---|
Material |
Polyallomer
|
Maximum Rotor Speed (exact details in datasheet) | 150krpm |
Packing Unit | 50 pieces |
Tube Diameter |
11mm
|
Volume | 2,2ml |
Manufacturer |
Seton
|
Related products
-
Art.Nr: S4116This easy-to-use device duts offthe Beckman heat-sealed stem or the DuPont crimp-sealed stem while the tube remains in the vertical position.
-
€183.80 €218.72Art.Nr: S4131
Tube racks are made of white Delrin and are designed to preciscely fit Science Service, Seton, Beckman and DuPont/Kontron ultracentrifuge tubes.
€183.80 €218.72 -
€85.30 €101.51Art.Nr: S4195The special blade assembly has a large loop for use with all microtubes up to 1.5ml. lt will cut all brands and materials of tubes and pipette tips including PA, PP, high and low density PE.€85.30 €101.51