Englisch 
Deutsch 
My Cart
You have no items in your shopping cart.
SEM Specimen Mount
(35)
-
Starting at
Low Profile Fortress™ FIB Holder to hold either a standard FIB lift out specimen on a grid or an H-Bar cut Sample. Securely holds the Fortress™ Low/High Profile holder under a stereomicroscope and permits viewing from 2 angles without changing focus on the microscope.Starting at
-
Starting at€107.20 €127.57
Ideal for examination cross section of thin samples, such as wafers, multi-layer of capacitors, plastics, metals, etc. For most AMRAY: 12,7mm diameter , 3.1mm dia. pin 3.1mm with split openings up to 6.4mm. Pin height: 8mm, 15mm.Starting at €107.20 €127.57
-
Starting at
Made from aluminium, used to adapt 3,1mm pin diameter SEM stubs.Starting at
-
Starting at€248.50 €295.72
The Multi Pin Holder ist designed to save time. It accommodates 5 Specimen holders with 12,5mm surface and 3,1mm pin.Starting at €248.50 €295.72
-
Starting at€193.20 €229.91
The Multi Pin Holder ist designed to save time. It accommodates 3 Specimen holders with 12,5mm surface and 3,1mm pin.Starting at €193.20 €229.91
-
Starting at€535.50 €637.25
This holder is designed to hold thin samples vertically in the SEM or any microscope. It is 25mm in diameter and 10mm thick. Each of the two loader jaws can hold up to 3mm thick samples.Starting at €535.50 €637.25
-
Starting at€589.70 €701.74
This holder will hold almost any sample from 3mm to 29mm in diameter plus various odd shaped samples, which one of their dimensions is not greater than 29mm.Starting at €589.70 €701.74
-
Starting at€170.70 €203.13
Vitreous Carbon Substrate. Surface polish to 1µm glassy finish.Starting at €170.70 €203.13
-
Starting at €13.40 €15.95
-
Starting at€58.20 €69.26
Made from ultra-pure aluminium. Lathe finish. With or without pin.Starting at €58.20 €69.26
-
Starting at€65.50 €77.95
Made from ultra-pure aluminium. Lathe finish.Starting at €65.50 €77.95
-
Starting at
Made from ultra-pure aluminium. Lathe finish. Two different heights available.Starting at
-
Starting at€49.30 €58.67
Made from ultra-pure aluminium. Lathe finish. Also available from spectroscopically pure carbon and in two different heights.Starting at €49.30 €58.67
-
Starting at€42.80 €50.93
Made from ultra-pure aluminium. Lathe finish. Also available from spectroscopically pure carbon and in two different heights.Starting at €42.80 €50.93
-
Starting at€13.70 €16.30
Made from ultra-pure aluminium. Lathe finish. Also available from spectroscopically pure carbon.Starting at €13.70 €16.30
-
Starting at
Made from ultra-pure aluminium. Lathe finish. Available in different diameters.Starting at
-
Starting at€25.50 €30.35
Made from ultra-pure aluminium. Lathe finish.Starting at €25.50 €30.35
-
Starting at€22.20 €26.42
Made from ultra-pure aluminium. Lathe finish. Available in different diameters.Starting at €22.20 €26.42
-
Starting at€53.70 €63.90
Made from ultra-pure aluminium. Lathe finish.Starting at €53.70 €63.90
-
Starting at
Made from ultra-pure aluminium. Lathe finish. Available in different diameters.Starting at
-
Starting at€41.30 €49.15
Made from ultra-pure aluminium – lathe finish, or made from spectroscopically pure carbon.Lathe finish.Starting at €41.30 €49.15
-
Starting at€20.90 €24.87
Made from ultra-pure aluminium – lathe or polished finish, or made from spectroscopically pure carbon.Lathe finish.Starting at €20.90 €24.87
-
Starting at€46.40 €55.22
Made from ultra-pure aluminium. Lathe finish.Starting at €46.40 €55.22
-
€292.90 €348.55Art.Nr: E75950-01A single set screw loading vise for fast and easy to hold specimens for SEM. The jaws are 25mm long, 11mm wide and 8mm high. 3.1mm pin.€292.90 €348.55 -
€161.90 €192.66Art.Nr: E75945-05Accommodates five 10mm diameter specimen stubs, with 3.1mm diameter pin.€161.90 €192.66 -
Art.Nr: MN75944-04It accommodates four pin type, up to 12.5 surface specimen stubs, with 3.1mm diameter pin. -
€406.20 €483.38Art.Nr: E75942-01Made from non-magnetic stainless steel with 3.1mm diameter pin and adjustable angle turn-screw. Just insert specimens edge-on and observe the cross section directly.€406.20 €483.38 -
€1,046.50 €1,245.34Art.Nr: E75930For your convenience we now carry a SEM Sample Holder Set to fill all of your needs. The set consists of one universal holder, one vertical mount holder for thin samples, one 3-pin and one 5-pin configuration holder with a key for the set screw all in a finely finished wood box. Please specify the base requirement for your instrument when ordering. Delivery time on this item is approximately 2 weeks.€1,046.50 €1,245.34 -
€75.50 €89.85Art.Nr: E75925It is 10mm in diameter, 5mm high, copper sample holder to fit in the first stage of the ISI DS 130 and 150 SEM's. The inner cylinder is height adjustable so that you can adjust the sample to the correct working distance.€75.50 €89.85 -
€248.50 €295.72Art.Nr: E75921-03The Multi Pin Holder ist designed to save time. It accommodates 5 Specimen holders with 12,5mm surface and 3,1mm pin. Adapter C: Overall measurement: 34.5mm long x 16mm diameter. All adapter have a threaded portion 5mm in length.€248.50 €295.72
